Fresno State engineering students help make protective gear for health workers

Central Valley Business Times

May 4 2020

  • Work on masks just the start
  • “If time, complexity and resources allow, they will begin work on mechanical ventilator prototypes”

Engineering students, faculty and alumni from Fresno State’s Lyles College of Engineering have been working up to 10 hours a day in recent weeks to design and produce personal protective equipment (PPE) for Central Valley health care workers.

They plan to donate about 1,000 face shields to Community Regional Medical Center in downtown Fresno.

Last week during Fresno State’s spring break, the team completed the final design and began production of the face shields — the first part of a three-phase, innovative project to support the community at a time when protective equipment is scarce for doctors, nurses and other health care providers.

“The second phase includes rapid prototyping and testing of an FDA-approved mask and the third phase includes powered air purifying respirators (PAPRs),” says Ram Nunna, dean of the Lyles College. “If time, complexity and resources allow, they will begin work on mechanical ventilator prototypes.”

Dr. John McClain, a pulmonary critical care fellow, and Dr. Eric Day, a second-year internal medicine resident with University of California, San Francisco’s Fresno branch of its School of Medicine located on the Community Regional Medical Center campus, contacted the Lyles College in March to discuss the anticipated need for custom-designed PPE.

“We need protective equipment that is cheap to manufacture and designed to meet the needs of our doctors, nurses and other allied health professionals while caring for patients during the coronavirus pandemic,” Mr. Day says. “We already have a critical shortage of providers in the Central Valley, so we are obligated to give our workers maximal protection to prevent exposure and illness.”

During the testing phases, Mr. Day took several different prototypes to Community Regional, where nurses and physicians in the intensive care unit wore the face shields for several hours to test the comfort. Students worked to refine the face shields for both comfort, sanitation and reuse.

The final design was developed by Shervin Zoghi, a 2017 mechanical engineering alumnus, with the help of several Fresno State students. The design is made of 3-D printed plastic, transparency film and Velcro. Both the frame and Velcro can be sanitized for re-use. The shield is made of transparency film, which is inexpensive and can be disposed of or sanitized after each use. A new shield can be easily loaded onto the frame.

“Shervin was the undergraduate Dean’s Medalist for the Lyles College of Engineering in 2017. His great entrepreneurial spirit, dedication to service and community and willingness to bring people together really made an impact in this project,” Mr. Nunna says. “He, along with support from our graduate and undergraduate students, Mandeep Singh, Saule Bomar, Noah Haworth, Timofey Volkov, Anderson Medina Guerrero and Jaklin Rowley, made a great design. As for Dr. Day, he might as well be MacGyver. He enjoys experimenting with technology and coming up with innovative ideas using parts from various systems and has been an excellent collaborator.”

The team plans to donate face shields to Community Regional and surrounding clinics in hopes it will help keep the region’s health care providers healthy.

“For a nurse in the medical ICU who is taking care of a COVID-positive patient, they could probably go through as many as 10 face shields in a 12-hour shift,” Mr. Day says. “We need as many as we can get.” Mr. Nunna says each face shield costs about $1.50 to produce, and the mask and PAPR units would cost more. Fresno State President Joseph Castro and technology firm DPS Telecom, under CEO Bob Berry, provided funds for all the materials used. The 3-D printers were collected from the Lyles College of Engineering, Henry Madden Library, Lyles Center for Innovation and Entrepreneurship and technology firm 5 Microns and were pooled for the manufacturing of the shields.

“We were able to access cost-efficient, existing materials. These materials combined with donated 3-D printers and simple machining have allowed our students to design and produce low-cost, quick turnaround PPE,” Mr. Nunna says.

In addition to affordability and comfort, the face shield is produced in a stackable design that aids in production efficiency – cutting production time by 15 percent to 20 percent. Civil engineering senior and project teammember Jaklin Rowley said the use of advanced technology like 3-D printers have made it possible to share design files and send them to anyone with a 3-D printer.

“This creates a unique situation for people all over to ‘hive’ manufacture a product that can greatly help the community,” Mr. Rowley says. “It is through technology that we have been able to stay connected through this pandemic. People from all over have learned to communicate and innovate from remote places. Without modern-day technology, the extraordinary community response to create these face shields would not have been so easily possible.”

The design is available for anyone with a 3-D printer to print from the open source website.

“This experience is invaluable. This project has allowed students to apply knowledge obtained from their education at Fresno State to real-world problems, work as a team with other disciplines and under tight time constraints,” Mr. Nunna says. “Students are interested in making an impact on the world, and this work enables them to do so.”

https://files.constantcontact.com/2cb20f61601/682ecac7-bbb8-4d8e-80e1-8808a64214e8.pdf

Comments for this post are closed.